QIDI X-Plus 3 3D Printer
| Design | 9.1 |
|---|---|
| Software | 9.2 |
| Control | 8.7 |
| Power | 9 |
- Using Cortex-A53 64-bit processor, clocked at 1.5Ghz, 8G-EMMC and 1G DDR3, bringing better printing results.
- TMC2209 silent driver and CoreXY structure can reduce motion inertia and increase motion speed, providing a low-noise printing experience.
- High-hardness steel linear hollow optical shaft improves surface straightness and reduces error deviation by 60%.
- Features an independent heating device, the maximum temperature can reach 65 degrees Celsius.
- QIDI slicing software has normal and expert modes, making it easy for beginners to use.
- Automatic bed leveling ensures flatness of the printing platform and good print adhesion.
- The printing speed is up to 600mm/s, the printing acceleration is 20000mm/s², and the extruder flow rate is 35mm3/s.
Performance
With a 64-bit Cortex-A53 processor clocked at 1.5GHz, 8GB of EMMC storage, and 1GB of DDR3 RAM, the QIDI X-Plus 3 boasts improved performance. This hardware configuration is designed to deliver improved printing results, offering the capacity to handle complex designs and faster print speeds, minimizing the risk of printing interruptions due to memory constraints.
Structure
The QIDI X-Plus 3 incorporates TMC2209 silent drivers and a CoreXY structure to minimize motion inertia and increase motion speed. This design choice contributes to a quieter printing experience. Reduced noise levels do not compromise precision, ensuring the printer maintains accuracy and efficiency.
Structural rigidity is crucial in 3D printing, and the QIDI X-Plus 3 addresses this by employing a high-hardness steel linear hollow optical shaft. This component significantly improves surface straightness and reduces error deviation by 60%, resulting in precise and high-quality prints.
Temperature
Including an independent heating device allows the QIDI X-Plus 3 to achieve a maximum temperature of 65 degrees Celsius. This level of thermal control accommodates various filament materials, ensuring consistent quality and adhesion.
Software
The QIDI slicing software caters to users of different skill levels with normal and expert modes. This approach enhances accessibility, with beginners benefitting from the simplicity of the normal mode and experienced users gaining advanced control in the expert mode.
Leveling
Automatic bed leveling simplifies a critical aspect of 3D printing, ensuring a level printing platform and reliable print adhesion. This feature reduces the potential for failed prints due to improper bed leveling.
Speeds
The QIDI X-Plus 3’s printing speed, reaching up to 600mm/s, along with a printing acceleration of 20000mm/s², ensures efficient material deposition. The extruder’s flow rate of 35mm³/s further contributes to shorter print times without sacrificing print quality.
- High precision
- Large build volume
- User-friendly interface
- Pricey
- Requires assembly
- Filament loading complexity
Specification: QIDI X-Plus 3 3D Printer
|
Videos: QIDI X-Plus 3 3D Printer
Current: $ | Average: $571.27 | The lowest: $695.19 | 5 records in DB | Price monitoring since 2023-09-19
