BIQU B1 SE Plus 3D Printer

Add your review
SKU: 1890487

$460.85

Product is rated as #115 in category Computers & Office
Performance9
Print8.9
Features8.8
Material8.8
  • Features the improved bed leveling function
  • Equipped with touchscreen UI and knob
  • Filament sensor and power loss recovery supported
  • Equipped with a powerful 32-bit chip
  • Features the silicon carbide construction surface glass plate

The BIQU B1 SE Plus 3D Printer has several differences compared to its predecessors. The B1 SE Plus features improved bed leveling including fixed bed leveling with hot and probing for completely automatic and integrated bed leveling. In addition, pre-print automatic leveling gives an opportunity to eliminate print failures. Uneven print surfaces with minimal delays are probably the main reason for print failures.

BIQU B1 SE Plus 3D Printer Features

The “SE” in the name perhaps refers to “Special Edition”. At the same time, the “Plus” stands for the extra built volume. The print volume of the Biqu B1 SE Plus uses a print volume of up to 310 x 310 x 340mm. On the other hand, besides the large print volume, there are also Z-axis brackets. You should attach these brackets to the printer’s base from the side. In the cases of other models, Z-axis brackets are attached to the top.

Instead of the simple USB Type-C connection, the B1 SE Plus adopts a heftier cable. Moreover, there are no backports as we have seen on the original B1 model. On the right side, the 3D printer has slots to add a second Z-axis lead screw or stepper motor. However, the printer lacks ports for RGB lighting or a Wi-Fi module to install without difficulties.

It is also worth noting that the printer comes with both a touchscreen UI and a rotary knob. Thus, in case the touchscreen gets out of the way, it is an advantage to have a second interface. In order to ensure a successful printing process, the B1 SE Plus supports a filament sensor and power loss recovery. As for the noise, the printer works in an almost silent noise. There is no need to worry about disturbing surroundings. As a result, we have a 3D printer that will be a good option for both beginners and professional users.

9Expert Score
BIQU B1 SE Plus 3D Printer
Gizcoupon Review
The BIQU B1 SE Plus features improved bed leveling. In addition, pre-print automatic leveling gives an opportunity to eliminate print failures.
Performance
9
Print
8.9
Features
8.8
Material
8.8
PROS
  • Automatic leveling
  • All-metal extruder
  • Powerful 32-bit chip
  • Silent printing
CONS
  • Not found

Specification: BIQU B1 SE Plus 3D Printer

Brand

Biqu

Product types

3D Printers

Printing Technology

FFF – FDM – LPD

Supported operating systems

Windows (7+)

Extruder type

Bowden Extruder

Number of extruders

Single

Interfaces

USB – Connection, SD card, Wi-Fi – WLAN

Supported Formats (Slicer)

STL, OBJ

Heated building board

Yes

Filament Diameter

1.75 mm

Building platform

310 x 310 x 340 mm

Videos: BIQU B1 SE Plus 3D Printer

We track BIQU B1 SE Plus 3D Printer for you and email you once the product dropped below your desired price.

Current: $460.85 | Average: $460.85 | The lowest: $460.85 | 1 records in DB | Price monitoring since 2022-07-22

Set A Price Alert

Create a price alert for BIQU B1 SE Plus 3D Printer

You'll receive an email when the price will be equal to or below the maximum price.

You can delete or update this alert by clicking the link in a message that will be sent to your e-mail address.

Your e-mail address will be used ONLY for this price alert.
Gizcoupon
Logo
Register New Account